1. When the main antechamber is inflated, you should always observe the change of gloves to prevent the inflation from too fast to break the gloves.

   2. When taking samples through the transition chamber, the inner and outer doors of the transition chamber should be blocked in time to prevent air from entering.

   3. If the door buckle is found to be loose or too tight, you can adjust the screw on the buckle to achieve the best closed state.

   4. When the glove box is not in use, each door should be opened to prevent the glove box door from being deformed due to prolonged squeeze.

   5. Avoid touching the gloves and the corners of the instruments and equipment when trying to prevent the gloves from being cut.


   6. After each attempt, the power of the glove box should be cut off to prevent fire.


  • Jul 14, 2020
  • Comments: 0
Comments: 0

No comments

Leave a Reply

Your email address cannot be published. Required fields are marked*