"Molecular pump + mechanical pump" high vacuum system:

Pumping speed: 1200L / S, a true quasi-oil-free vacuum system, which uses down pumping to avoid the pumping weakness of the molecular pump and improve the pumping speed. The molecular pump is guaranteed for 5 years and provides direct replacement service for damage.

  * Optional imported molecular pump

Specifications: Rotary vane vacuum pump, with oil mist filter, with gas ballast control

Flow: 36 m³ / h (21 cfm), double substrate, vacuum degree

* Optional dry vacuum pump

AC 230 V / 50-60 Hz, 10 A or AC 115 V / 50-60 Hz, 20 A (optional)

Draw from the atmosphere to 9 × 10-4Pa≤30min (expose the atmosphere for a short time, start to evacuate after rushing into dry nitrogen)

Fore valve / bypass valve: GDQ-40 high vacuum pneumatic baffle valve;

"Two lows and one high" (two resistance gauges measure low vacuum, one ionization gauge measures high vacuum) Digital composite vacuum gauge, measuring range from 1 × 105Pa to 1 × 10-5Pa; it can be displayed and controlled by PC, which can be realized Interlocking operation.

* Optional imported wide-range vacuum transmitter

Partially adopts metal seal and partly adopt fluorine rubber ring seal;

Water-cooled copper electrode + evaporation boat structure, anti-pollution partitions are installed between evaporation sources, and each source is equipped with positioning baffle, intelligent PC control;

Room temperature 0 ~ 1300 ℃

0 ~ 3000W, the current is regulated by inverter, which is stable and reliable. The power of the power supply is continuously adjustable from 0 to the maximum power.

2 sets, automatic switching controlv

It adopts windows operating platform and cotrl2000 control system, and adopts IPC + network technology to realize parameter setting of the main components of the whole machine, implement real-time monitoring and intelligent fault diagnosis, and fully automatic monitoring of film thickness. There are two modes of automatic and manual control. Except for taking and putting samples, all other operations are controlled by software on the PC; it provides friendly human-machine operating interfaces such as vacuum system, process settings, and gas filling and deflation systems; on the industrial computer, parameters can be set through the recipe to achieve the process and process of the program. Setting, storage and printing of equipment parameters.

Can effectively solve the coating accuracy, stability and reliability.

Complete program interlocking, complete design and protection against misoperation; system alarms for abnormal conditions such as water shortage, over-current and over-voltage, and corresponding protection measures are implemented.

It adopts rich I / O interface design to fully meet the functional requirements of expansion and external devices.

The display controls the door opening / closing of the coating machine.

Coating process, process, film thickness, convenient and save printing.

A quartz crystal film thickness controller is used, and a water-cooled film thickness probe is installed near the substrate table, and an industrial computer is connected. The film thickness meter is used to monitor the coating rate and final thickness in real time, and the accuracy can reach ± 1A (0.1nm). The real-time information is fed back to the industrial computer. If the coating thickness reaches the set thickness, the power can be automatically controlled, and the coating can be stopped to achieve the purpose of automatic film thickness control. 

Monitoring thickness range: 1Å ~ 99µ9999Å, resolution 1Å; Monitoring rate range: 0.1Å ~ 9999.9Å.S / s, resolution 0.1Å

The coating process, process and film thickness settings are all on the PC, which can realize automatic control of the entire process. The coating process can be set on the PC and data can be recorded.

The cooling water circuit is 8 inlets and 8 outlets, and the total water inlet is controlled by a hydraulic relay.

The total inlet and outlet water is connected to a 1P refrigeration cycle water machine, and the temperature control range is 10-25 ℃. Provide stable refrigerated circulating water to targets, metal sources, molecular pumps, and magnetic fluids to ensure stable operation of the equipment.

ISO9001 certification、CE certification、UL certification

Please refer to the danger, warning, caution, etc.