The vacuum glove box is a fairly simple device, consisting of a vacuum chamber and gloves inserted into it. The vacuum pump draws air out of the vacuum chamber to create a low-pressure, low-humidity environment, and the gloves allow the operator to operate anything in the vacuum chamber. Normally, this is done with the reintroduction of inert gas, such as nitrogen or argon, into the chamber, allowing the operator to do experiments or perform other operations on the contents in an inert atmosphere, preventing contamination with reactive gases such as oxygen or liquids such as water. This also adds a safety factor, because the inert atmosphere is non-flammable. Most vacuum glove boxes are made of acrylic, allowing the operator to easily see the inside of the box when operating the contents of the box.

The vacuum glove box system is a laboratory equipment that fills high-purity inert gas into a closed box, and circulates and filters out the active substances (both water and oxygen can reach below 1PPM) through the purification system.

It is mainly composed of cabinet, frame, transition cabin, gas purification system, PLC automatic control system, etc.

It mainly removes O2, H2O, and organic gases.

It is suitable for ultra-pure environment without water, oxygen and dust. Such as: lithium ion batteries and materials, semiconductors, super capacitors, special lamps, laser welding, brazing, etc.

Create a closed environment isolated from the outside, extract the active substances in the environment, and fill in inert gas or nitrogen to make the environment continue to maintain a clean, dry, high-purity inert gas state.

The vacuum glove box is a standard vacuum hand equipment that can be used directly. It is composed of the main work compartment, the main transition compartment, the tool transition compartment, the vacuum system and various parts. It has high airtightness and pressure holding time. The characteristics of long, simple operation, etc., can satisfy the application of scientific research and small batch production in colleges and universities.

The glove box is a closed loop design, which saves operating costs. Under standard conditions, that is, a constant temperature of 20ºC, a standard atmospheric pressure, 99.999% inert gas source, and water and oxygen targets are less than 1ppm;

304 stainless steel plates are used for the box body and the large and small transition cabins, and the front window is tempered glass, which is wear-resistant and corrosion-resistant;

Touch screen PLC control, high degree of automation, can realize: automatic control of gas pressure in the box, automatic cleaning of the atmosphere in the box, automatic regeneration of purification data, automatic recording of system operation data and other operations;

Vacuum Glove Box price

High vacuum glove box

Glove box workstation

Acrylic vacuum glove box